Stainless steel
H2532

 

 

Technical Information
power:
4x1
W
lamp:
LED , 4x 1W, 459 lm, 5000 K, 80 CRI, 115 lm/w

wiring:
SC

dimensions(mm):
height 68

diameter:
120
mm
weight:
0.75
Kg
angle:
0
°
max. temp glass:
0
°C
Description
Die-cast aluminium body.
AISI 316 stainless steel frame.
AISI 316 stainless steel counter-ring.
Polyester powder paint resistant to corrosion, atmospheric
conditions and salt spray fog.
Thermal-shock resistant and tempered safety glass.
Silicon rubber gaskets.
Double M16 cable gland for cascade connection.
Stainless steel external screws.
It complies with the EN 60598-1 and EN 60598-2-2
Standards.
note:
Transformer to be ordered separately.
Specification

Series of ceiling recessed-mounted high-protection round, limited-size appliances.

Body and frame in polyester powder-painted die-cast aluminium (paint resistant to corrosion, the elements, and salt spray fogs) or AISI 316 stainless steel frame.

Tempered, anti-thermal shock transparent or acid-etched glass diffuser (depending on the version), silicon rubber fittings, double M16 cable clamp for cascade connection, and stainless steel external screws.

Available in the die-cast aluminium round frame, AISI 316 stainless steel round frame or AISI 316 stainless steel square frame versions.

Two possible heights are available; in the lower version (68 mm), the following lamps are used: 3x1W and 18x0.1W LEDs and 20W G4 halogen lamps (with aluminium reflector). LEDs having various light beam angles (9° - 24° - 40°) and in various colours (3000K, 4000K and 6000K white, blue, red, yellow, green) are available; in the higher version (117mm), the following lamps are used: 3W GU10 230V (25°) LEDs, 20W GU4, 12V (30°, orientable optics) and 35W GU10, 230V halogen lamps.

Suitable for false ceilings having thicknesses ranging between 1mm and 20mm.

The drivers are remote so as to be installed in areas where extremely low operating voltage is required.

The range is completed by RAY 65 (having a lower power and a smaller size)and RAY 180 (having a higher power and a larger size), to provide the ideal solution for any and all technical lighting needs.

Size: recess hole = 110mm, frame = 120mm, H = 68mm, 117mm.

IP68 protection class, class III electrical insulation for all lamps except 3W GU10 LEDs and 35W GU10 halogen lamps, which are in electrical insulation class I.

Appliance built in full compliance with standards EN 60598-1and EN 60598-2-1.